Product Description
SLZ-05 is broad spectrum antimicrobial agent with organic active content. It is widely used to protect PVC, PU, Silicon resin, polyolefin, polyester, etc. from microbes including bacterial, mildew, algae, and brings antimicrobial effect to the surface of plastic & painting.
Application
SLZ-05 is used for protection of PVC, PU foaming, silicon resin, polyolefin, polyester, acrylic acid resin:
Ø Bath curtain;
Ø Painting on textile (ex. Anorak, raincoat, tent, etc.)
Ø Vinyl wall-paper, floor;
Ø Underlayment of swimming pool;
Ø Conveyer belt;
Ø Sole & vamp of shoes;
Ø Sealant, gap-filling glue, adhesive;
Ø Roof waterproof membrane;
Ø Protective jacket for wire and pipe;
Ø Automobile assembly;
Ø Foaming material (ex. Seat cushion, cushion ring, etc.)
Ø Gasket for household electrical appliances (ex. Washing machine, refrigerator);
Ø Water-proof fabric, sun visor;
Ø Antimicrobial painting.
Antimicrobial effect
The antimicrobial effect of SLZ-05 could be evaluated with Minimum Inhibition Content (MIC):
|
Bacterial
|
MIC
|
|
Escherichia coli
|
8
|
|
Klebsiella pneumonia
|
8
|
|
Streptococcus faecalls
|
16
|
|
Stapyylococcus aureus
|
4
|
|
Mildew
|
MIC
|
|
Aureobasidium pullulans
|
2
|
|
Aspergillus niger
|
8
|
|
Chaetomium globosum
|
2
|
|
Gliocladium virens
|
64
|
|
Yeast
|
MIC
|
|
Candida albicans
|
2
|
|
Pityrosporum ovale
|
4
|
|
Algae
|
MIC
|
|
Trentepohlia odorata
|
0.06
|
Physical property
|
Active content %
|
95% w/w min.
|
|
Appearance
|
White to light yellow powder or white liquid
|
|
Specific gravity
|
1.782g/ml
|
|
pH at 10% solution 25°C
|
6.0 – 9.0
|
|
Stability
|
Stable under normal storage, stable to heat, no volatilization
|
|
De-compose temperature
|
240°C
|
Instruction to application
SLZ-05 is used in procedure of manufacturing liquid or solid antimicrobial product, or directly into plastic product to achieve antimicrobial effect to the surface.
The dosage of SLZ-05 in product should depend on following factors: sensitivity of microbes to the product, the depth of microbes erosion, the type of microbes, pH, temperature, humidity, and required life of antimicrobial effect.
It is suggested to apply SLZ-05 at 0.3-1.0% on weight of the finished product. The optimum dosage should be judged in actual production
